Verify Card Status
Select Operation [1-7 or 0:Quit]: 7
Command Line Interface Usage:
Enter the following line of text in the CLI to run the
-
getsmartlog
command:
ddcli -c 1 -getsmartlog -slot 2 -path /root
.
Related Information
■
Utility Command Summary” on page 38
Help Command
The
-help
command displays help for command line usage.
Sample Output
: When the
-help
command runs, the
ddcli
utility outputs the following text.
# ddcli -help
****************************************************************************
LSI Corporation WarpDrive Management Utility
Version 110.110.03.00 (2013.07.12)
Copyright (c) 2013 LSI Corporation. All Rights Reserved.
****************************************************************************
ddcli <-c controller#> [command] [parameters]
<controller #> : Number between 1 and 256
<command> is:
-listall - Display information about WarpDrive(s) in the system (does not need
controller number)
-list - Lists information about the selected WarpDrive
-updatepkg - Updates WarpDrive flash package
-health - Display the health of selected WarpDrive
-locate - Locate selected WarpDrive in the system
-format - Format selected WarpDrive
-showvpd - Show Vital Product Data
-getsmartlog - Extract SMART Logs
-help - Display help(does not need controller number)
<parameters> are:
Command specific values
Servicing the Card
53
