Verify Card Status
The
-listall
command runs without any command line parameter. You need not specify the
-
c
option on the command line.
Sample Output
: When the
-listall
command runs, the
ddcli
utility outputs the following
text. Four Sun Flash Accelerator F80 PCIe Cards are shown in the following example:
ID WarpDrive Package Version PCI Address
-- --------- --------------- -----------
1 ELP-4x200-4d-n 09.05.24.00 00:02:00:00
2 ELP-4x200-4d-n 09.05.24.00 00:03:00:00
3 ELP-4x200-4d-n 09.05.24.00 00:04:00:00
4 ELP-4x200-4d-n 09.05.24.00 00:05:00:00
Related Information
■
“Verify Card Status” on page 38
■
Utility Command Summary” on page 38
List Command
The
-list
command lists the physical device information of a selected Sun Flash Accelerator
F80 PCIe Card.
The following Sun Flash Accelerator F80 PCIe Card information is displayed with the
-list
command.
■
Sun Flash Accelerator F80 PCIe Card ID
■
PCI address
■
SAS address
■
Card flash package version
■
RAID support
Text Menu Interface Usage
: The following top-level menu lists the cards in the system and
prompts you to select a card on which to perform an operation. Four Sun Flash Accelerator F80
PCIe Cards are shown in the following example:
# ddcli
ID WarpDrive Package Version PCI Address
-- --------- --------------- -----------
1 ELP-4x200-4d-n 09.05.24.00 00:02:00:00
2 ELP-4x200-4d-n 09.05.24.00 00:03:00:00
3 ELP-4x200-4d-n 09.05.24.00 00:04:00:00
40
Sun Flash Accelerator F80 PCIe Card User's Guide • December 2013