Access Command Line Interface (CLI) in
ddcli
Utility
The
ddcli
utility displays the following top-level menu, showing a list of cards in the system.
Four Sun Flash Accelerator F80 PCIe Cards are shown in the following example:
ID WarpDrive Package Version PCI Address
-- --------- --------------- -----------
1 ELP-4x200-4d-n 09.05.24.00 00:02:00:00
2 ELP-4x200-4d-n 09.05.24.00 00:03:00:00
3 ELP-4x200-4d-n 09.05.24.00 00:04:00:00
4 ELP-4x200-4d-n 09.05.24.00 00:05:00:00
Select the WarpDrive [1-4 or 0:Quit]
2.
Select a Sun Flash Accelerator F80 PCIe Card ID 1 to 4 (ELP).
3.
After you select one of the cards in the top-level menu, the
ddcli
utility displays
the following menu:
1. List WarpDrive Information
2. Update Flash Package
3. Display WarpDrive Health
4. Locate WarpDrive
5. Format WarpDrive
6. Show Vital Product Data
7. Extract SMART Logs
Select Operation [1-7 or 0:Quit]:
4.
Select the operation [1-7 or 0:Quit]:
Related Information
■
“Access Command Line Interface (CLI) in
Access Command Line Interface (CLI) in
ddcli
Utility
To access the
ddcli
utility in CLI mode, type one of the following commands:
ddcli -< -c DDiD > -< -option arg >
■
or
ddcli
Related Information
■
“Access Text Menu Interface in
Servicing the Card
37
