Oracle SUN Fire X4640, Руководство по диагностике

Страница: 23 / 44

Using the ILOM to Monitor the Host
This section describes how to view server sensor readings and view the system event log.
This section contains the following procedures:
■
“Viewing the ILOM Sensor Readings” on page 23
■
“Viewing the ILOM System Event Log” on page 26
■ “Clearing the Faults from the System Event Log” on page 30
■
“Interpreting Event Log Time Stamps” on page 31
Viewing the ILOM Sensor Readings
There are three ambient temperature sensors that are monitored. Each CPU board has two
temperature sensors. Ambient temperature sensors and core temperature sensors on CPU
boards are fed to IPMI stack to adjust fan speed. View the sensor information in
Sun ILOM 3.0
Supplement for the Sun Fire X4640 Server for more information about the sensors.
This section contains the following procedures:
■
“How to Use the ILOM Web Interface to View the Sensor Readings” on page 23
■
“How to Use the ILOM Command-Line Interface to View the Sensor Readings” on page 25
▼
How to Use the ILOM Web Interface to View the Sensor Readings
To view sensor readings, you need the Read Only (o) role enabled.
Log in to the SP as Administrator or Operator to reach the ILOM web interface:
a. Type the IP address of the server’s SP into your web browser.
The Sun Integrated Lights Out Manager Login screen is displayed.
b. Type your user name and password.
When you first try to access the ILOM Service Processor, you are prompted to type the
default user name and password:
Default user name:
root
Default password:
changeme
Before You Begin
1
23