Oracle StorageTek SL3000, Руководство пользователя

Страница: 181 / 216

Wall Diagrams
Library Addressing Reference E-15
"Default SCSI Storage Element (Cartridges) Numbering Scheme" on page E-11 for all
active slots, but skips over any inactive slots and slots not within the partition.
Therefore, element numbering is continuous within each partition, even if slot
locations for the partition are not adjacent.
If you allocate more resources to the partition, the SCSI numbering of previously
numbered elements in the partition do not change. The library simply appends the
SCSI numbering for newly activated slots or newly inserted tape drives within the
partition.
Tape Drive Hardware Numbering
The hardware numbering is assigned by the HBC controller card. It is used to identify
a tape drive slot. The card automatically assigns a number, 1-56, to each drive slot.
Figure E–12 Tape Drive Physical Hardware Numbering (viewed from rear of library)
See Also
■
"Internal Firmware Addressing of Tape Drives" on page E-4
■
"HLI Addressing of Tape Drives" on page E-9
■
"Default SCSI Data Transfer Element (Drives) Numbering Scheme" on page E-11).
Wall Diagrams
■
Base Module front wall ( Figure E–13 )
■
Base Module rear wall ( Figure E–14 and Figure E–15 )
■
DEM front wall ( Figure E–16 and Figure E–17 )
Note:
The perspective in Figure E–12 is from the drive-side (rear) of
the library.