Oracle SPARC T5-4 Скачать руководство пользователя страница 42

Страница: 42 / 204

Check the Message Buffer

SPARC T5-4 Server Service Manual • July 2016

■

“Understanding Diagnostics” on page 23

■

“Managing Faults” on page 37

Check the Message Buffer

The

dmesg

command checks the system buffer for recent diagnostic messages and displays

them.

Log in as superuser.

Type:

dmesg

Related Information

■

“View Log Files (Oracle Solaris)” on page 42

■

“View Log Files (Oracle ILOM)” on page 43

View Log Files (Oracle Solaris)

The error logging daemon,

syslogd

, automatically records various system warnings, errors, and

faults in message files. These messages can alert you to system problems such as a device that

is about to fail.

The

/var/adm

directory contains several message files. The most recent messages are in

the /

var/adm/messages

file. After a period of time (usually every week), a new

messages

file is automatically created. The original contents of the

messages

file are rotated to a file

named

messages.1

. Over a period of time, the messages are further rotated to

messages.2

and

messages.3

, and then deleted.

Log in as superuser.

Type:

more /var/adm/messages

To view all logged messages, type:

Содержание SPARC T5-4













































































































































































































Результаты поиска

Содержание SPARC T5-4

Отзывы:

Oracle SPARC T5-4, Руководство по обслуживанию, Страница: 42 / 204

Результаты поиска

Содержание SPARC T5-4

Отзывы: