Oracle SPARC T5-2 Скачать руководство пользователя страница 50

Страница: 50 / 186

Interpreting Log Files and System Messages

Interpreting Log Files and System Messages

With the OS running on the server, you have the full complement of Oracle Solaris OS files and

commands available for collecting information and for troubleshooting.

If PSH does not indicate the source of a fault, check the message buffer and log files for

notifications for faults. Drive faults are usually captured by the Oracle Solaris message files.

These topics explain how to view the log files and system messages.

■

“Check the Message Buffer” on page 50

■

“Understanding Diagnostics” on page 31

■

“Managing Faults” on page 46

Check the Message Buffer

The

dmesg

command checks the system buffer for recent diagnostic messages and displays

them.

Log in as superuser.

Type:

dmesg

Related Information

■

“View Log Files (Oracle Solaris)” on page 50

■

“View Log Files (Oracle ILOM)” on page 51

View Log Files (Oracle Solaris)

The error logging daemon,

syslogd

, automatically records various system warnings, errors, and

faults in message files. These messages can alert you to system problems such as a device that

is about to fail.

SPARC T5-2 Server Service Manual • February 2017

Содержание SPARC T5-2



























































































































































































Результаты поиска

Содержание SPARC T5-2

Отзывы:

Oracle SPARC T5-2, Руководство по обслуживанию, Страница: 50 / 186

Результаты поиска

Содержание SPARC T5-2

Отзывы: