Oracle SPARC T5-1B, Руководство по обслуживанию

Страница: 35 / 114

Clear a Fault
■
Component name (
/SYS/MB/CM0/CMP/BOB6/CH1/D0
)
■
Part number (
07042208,M393B1K70DH0-YK0
)
■
Serial number (
00CE0212133341DB80
)
4.
Use the message ID to obtain more information about this type of fault:
a.
Obtain the message ID from console output.
b.
Log into My Oracle Support at:
https://support.oracle.com
c. Search on the message ID.
5. Follow the suggested actions to repair the fault.
6. If necessary, clear the fault manually.
See “Clear a Fault” on page 35 .
Related Information
■
“PSH Overview” on page 32
■
“Clear a Fault” on page 35
Clear a Fault
When PSH detects faults, the faults are logged and displayed on the console. In most cases,
after the fault is repaired, the corrected state is detected by the server module, and the fault
condition is repaired automatically. However, this repair should be verified. In cases where the
fault condition is not automatically cleared, you must clear the fault manually.
1.
After replacing a faulty FRU, power on the server module.
2. Determine whether the replaced FRU still shows a faulty state.
See “Check for Faults” on page 33 .
■
If no fault is reported, you do not need to do anything else. Do not perform
the subsequent steps.
■
If a fault is reported, continue to Step 3 .
Detecting and Managing Faults 35