Maintaining Storage Arrays
This section contains the procedures about how to maintain a storage system in a running
cluster.
Table 3–1
lists these procedures.
TABLE 3–1
Task Map: Maintaining a Storage System
Task
Information
Remove a storage array
“How to Remove a Storage Array” on
page 27
Upgrade storage array firmware
“How to Upgrade Storage Array Firmware”
on page 26
Replace a node-to-switch component
“How to Replace a Node-to-Switch
Component in a Cluster Without
Multipathing” in
Oracle Solaris Cluster 3.3
With Sun StorEdge 9900 Series Storage
Device Manual
Replace a node's host adapter
“How to Replace a Host Adapter” in
Oracle
Solaris Cluster 3.3 With Sun StorEdge
A3500FC System Manual
Replace a disk drive
“How to Replace a Failed Disk Drive in a
Running Cluster” in
Oracle Solaris
Cluster 3.3 With Sun StorEdge A3500FC
System Manual
Add a node to the storage array
Oracle Solaris Cluster system
administration documentation
Remove a node from the storage array
Oracle Solaris Cluster system
administration documentation
Note –
Most storage arrays are maintained through common array management software. For
example, see
Sun StorageTek Common Array Manager Software
.
▼
How to Upgrade Storage Array Firmware
Use this procedure to upgrade storage array firmware in a running cluster. Storage array
firmware includes controller firmware, unit interconnect card (UIC) firmware, EPROM
firmware, and disk drive firmware.
Maintaining Storage Arrays
Oracle Solaris Cluster 3.3 with StorageTek RAID Arrays Manual • September 2010, Revision A
26
