Oracle SG-EMFCOE2-Q-SR, Руководство по установке

Страница: 28 / 70

Testing the Installation
Callout Description
9 Attention LED (system requires attention)
10 Attention button
Table 8, “Converged Network Adapter LAN and SAN LED Status,” on page 28
summarizes the LAN and SAN LED status conditions.
TABLE 8
Converged Network Adapter LAN and SAN LED Status
LAN Traffic
Green LED
SAN Traffic
Green LED
LAN Traffic
Orange LED
SAN Traffic
Orange LED
Hardware State
Off Off Off Off Power off
Slow flashing
(unison)
Slow flashing
(unison)
Off Off Power on; no link
Slow flashing On Off Off Power on; link established; no activity
Flashing On Off Off Power on; link established; receive and transmit LAN
activity only
Slow flashing Flashing Off Off Power on; link established; receive and transmit SAN
(FCoE) activity only
Flashing Flashing Off Off Power on; link established; receive and transmit LAN
and SAN activity
Off On or flashing On Off Fatal error detected on LAN function; SAN functioning
normally
On or flashing Off Off On Fatal error detected on SAN function; LAN functioning
normally
Off Off On On Fatal error affecting both LAN and SAN functions
Slow flashing,
alternating with
other LED
Slow flashing,
alternating with
other LED
Off Off Beaconing
In addition, the OK and Attention LEDs indicate the following:
■
The OK LED is static green when the hardware is powered on and operating normally, and
off when the hardware is powered off.
■
The Attention button LED is static green when the hardware is powered on and operating
normally, flashing green when the -
ATTN
button is pressed, and off when the hardware is
powered off.
Testing the Installation
This section contains the following topics:
28 Sun Storage 10 GbE FCoE ExpressModule Converged Network Adapter From QLogic Installation Guide For Adapter
Models SG-EMFCOE2-Q-SR, SG-XEMFCOE2-Q-SR, SG-EMFCOE2-Q-TA, SG-XEMFCOE2-Q-TA, and 7101682 •
January 2017