Oracle Quad Port 10GBase-T, Руководство пользователя

Страница: 51 / 96

Install Oracle Solaris 11 Over a Network (Oracle SPARC)
Copyright (C) 1997-2011, Intel Corporation
CLIENT MAC ADDR: A0 36 9F 02 37 A4 GUID: FF200008 FFFF FFFF FFFF CE8C75282100
CLIENT IP: 10.134.155.174 MASK: 255.255.255.0 DHCP IP: 10.134.155.4
9.
Install the
i40e
driver and configure the adapter.
10.
After the OS installation completes, use the BIOS to change the boot device
priority to boot from hard disk to boot up the newly installed OS.
Unless you change the boot device priority, the OS installation process repeats.
Related Information
■
“Configure the Network Interface (Oracle Solaris)” on page 48
■
“Boot Options” on page 48
■
“Boot Over the Network (PXE)” on page 49
■
“Install Oracle Solaris 11 Over a Network (Oracle SPARC)” on page 51
Install Oracle Solaris 11 Over a Network (Oracle SPARC)
Refer to Chapter 1, “Overview of Booting and Shutting Down a System” in Booting and
Shutting Down Oracle Solaris 11.3 Systems for instructions on installing the Oracle Solaris 11
OS over the network.
1.
Prepare an installation server and a client server for installing the Oracle Solaris
11 OS over the network.
a. Create an installation server that contains the image of the Oracle Solaris 11
CD.
b.
Set up the client server to be installed over the network.
Refer to Managing Network Virtualization and Network Resources in Oracle Solaris 11.3
to learn how to create the installation server and set up the client server.
Note -
To install the client server over a network that is not part of the same subnet, you must
also create a boot server. Refer to Chapter 1, “Overview of Booting and Shutting Down a
System” in Booting and Shutting Down Oracle Solaris 11.3 Systems to learn about boot servers.
2.
Shut down and halt the client server to get to the OpenBoot (
ok
) prompt.
# shutdown -i0 -g0 -y . . .
Configuring the Network 51