Oracle ORACLE9I B10508-01, Руководство по установке, Страница: 60 / 186

HP OpenVMS Alpha System Configuration
3-16 Oracle9 i Installation Guide Release 2 (9.2.0.2) for HP Alpha OpenVMS
This step generates new SYSGEN parameters in a file named SETPARAMS.DAT
and runs the SYSGEN utility to set these parameter values as specified in that
file.
HP OpenVMS Alpha System Configuration
If your system fails to satisfy any listed requirement, then perform the tasks listed in
the next section as necessary to configure your system to meet these requirements.
Table 3–3 lists the requirements for installing Oracle9 i on your HP OpenVMS
system.
Setup Tasks to Perform as the SYSTEM User
Log in as the
system user
and perform the following tasks to set up your
environment for Oracle9 i :
Warning:
The REBOOT parameter in this example will cause
the system to automatically reboot when the SYSGEN is
complete.
See Also: For more information about using the AUTOGEN
utility, see the OpenVMS System Management Utilities Reference .
Table 3–3 HP OpenVMS Alpha System Configuration Summary
System Factors Requirement for Oracle9 i
HP OpenVMS Alpha
Parameters:
Minimum Global Pages/
Sections Verify that the values for MIN_GBLPAGES and
MIN_GBLSECTIONS are greater than, or equal to, the values
that were calculated for these parameters, as documented in
READMEVMS.DOC.
OpenVMS Accounts You need an OpenVMS account that is dedicated solely to
installing and upgrading Oracle products
.
The instructions in
this book are provided with the assumption that the account is
called
oracle9
.
Permissions for File
Creation Default Protections