manualshive.com logo in svg

Oracle Netra SPARC, Руководство администратора

Поделиться
Скачать
Oracle Netra SPARC Скачать руководство пользователя страница 46

Enable or Disable Automatic Booting (Oracle Solaris)

Related Information

■

“

printenv

 Output” on page 48

■

“Enable or Disable Automatic Booting (Oracle Solaris)” on page 46

Enable or Disable Automatic Booting (Oracle

Solaris)

While running Oracle Solaris, use this procedure to configure OpenBoot so that a host reset or

power on either attempts to boot automatically, or not. This change is permanent but only takes

effect after a host reset.

1.

Log in to Oracle Solaris as a user with root privileges.

2.

Set the OpenBoot 

auto-boot?

 parameter.

■

true

 – (Default) The host automatically attempts to boot from the devices specified in boot-

device.

■

false

 – The host does not automatically boot. You can boot manually.

For example:

# 

eeprom auto-boot?=false

3.

Verify the change.

# 

eeprom auto-boot?

auto-boot?=false

4.

Reset the host.

# 

init 6

The host resets. After initialization, the host attempts to boot or not based on your

configuration.

Related Information

■

“Enable or Disable Automatic Booting (OpenBoot)” on page 45

46

SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016

Содержание Netra SPARC













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды