manualshive.com logo in svg

Oracle Netra SPARC S7-2 Series, Руководство администратора, Страница: 84 / 90

Поделиться
Скачать
Oracle Netra SPARC S7-2 Series Скачать руководство пользователя страница 84

Update the Firmware

Related Information

■

“Update the Firmware” on page 84

Update the Firmware

The Live Firmware update feature of the SPARC M7, T7, and S7 series servers supports

updating Sun System firmware while the SPARC host is powered on. The Oracle ILOM

firmware update goes into immediate effect. However, the host components update is delayed

until the affected host is power cycled. Because Oracle ILOM can be updated while the host is

powered on, this feature reduces the total system down time.

Note - 

For SPARC T7 servers the Live Firmware Update feature requires a minimum Sun

System Firmware version of 9.5.2.g.

1.

Check the current system firmware version. From the Oracle ILOM command

prompt, type:

-> show /HOST 

2.

Download the latest available system firmware version from My Oracle Support

at:

https://support.oracle.com

Then place the 

SysFW

 image in a shared location the host can access, for example, a local or

network share or on a TFTP, FTP, HTTP or HTTPS server.

3.

Notify SP users of the scheduled firmware update and ask them to close all

client sessions until after the firmware update is complete. Do not perform any

other Oracle ILOM tasks during the firmware update.

4.

Update the firmware through the Oracle ILOM CLI.

For information about performing firmware updates using the web interface, see 

Update

the Server SP or CMM Firmware Image

 in the 

Oracle ILOM Administrator's Guide for

Configuration and Maintenance Firmware Release 3.2.x

.

a.   

Log in to Oracle ILOM using an account with Admin privileges.

See 

“Log In to Oracle ILOM” on page 19

.

b.   

Load the firmware image from the shared location. Type:

load -source protocol://

username:password@server_ip

/

path_to_image

/

image.pkg

84

SPARC and Netra SPARC S7-2 Series Servers Administration Guide • March 2017

Содержание Netra SPARC S7-2 Series



























































































Отзывы:

Нет отзывов