manualshive.com logo in svg

Oracle Netra SPARC S7-2 Series, Руководство администратора, Страница: 73 / 90

Поделиться
Скачать
Oracle Netra SPARC S7-2 Series Скачать руководство пользователя страница 73

Locate Device Paths (OpenBoot)

/SYS/MB/PCIE_SWITCH1/PCIE_LINK4   | current_config_state                   | Enabled
/SYS/MB/PCIE_SWITCH1/PCIE_LINK5   | current_config_state                   | Enabled
/SYS/MB/PCIE_SWITCH1/PCIE_LINK6   | current_config_state                   | Enabled
/SYS/MB/PCIE_SWITCH1/PCIE_LINK7   | current_config_state                   | Enabled
/SYS/MB/PCIE_SWITCH1/PCIE_LINK8   | current_config_state                   | Enabled
/SYS/MB/PCIE_SWITCH1/PCIE_LINK12  | current_config_state                   | Enabled
/SYS/MB/RISER1/PCIE1              | current_config_state                   | Enabled
/SYS/MB/RISER2/PCIE2              | current_config_state                   | Enabled
/SYS/MB/RISER3/PCIE3              | current_config_state                   | Enabled
/SYS/MB/RISER3/PCIE4              | current_config_state                   | Enabled
/SYS/MB/USB_CTRL                  | current_config_state                   | Enabled
/SYS/MB/XGBE                      | current_config_state                   | Enabled

->

Related Information

■

“Locate Device Paths (OpenBoot)” on page 73

Locate Device Paths (OpenBoot)

1.

Display the OpenBoot prompt.

See 

“Obtain the OpenBoot Prompt Under Various Conditions” on page 21

.

2.

From the OpenBoot prompt, type:

Note - 

This document applies to several server products. The following example is based on the

SPARC S7-2 server. Your output might vary from the examples based on your product.

ok 

devalias

  

fallback-miniroot        /pci@300/pci@1/pci@0/pci@2/usb@0/hub@2/storage@1/disk@0
rcdrom                   /pci@300/pci@1/pci@0/pci@2/usb@0/hub@2/storage@1/disk@0
disk7                    /pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p4
disk6                    /pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p5
disk5                    /pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p7
disk4                    /pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p6
disk3                    /pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p0
disk2                    /pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p1
disk1                    /pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p3
disk                     /pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p2
disk0                    /pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p2
sas0                     /pci@302/pci@2/pci@0/pci@14/LSI,sas@0
sas                      /pci@302/pci@2/pci@0/pci@14/LSI,sas@0
nvme3                    /pci@302/pci@2/pci@0/pci@7/nvme@0/disk@1

Matching Devices to Device Names

73

Содержание Netra SPARC S7-2 Series



























































































Отзывы:

Нет отзывов