Oracle MiniCluster S7-2, Руководство по обслуживанию, Страница: 23 / 38

Install a Storage Array HDD or SSD (CRU)
Open the drive lever on the replacement drive and slide the replacement drive as far into the
drive slot as possible and then close the lever to lock it into place. Check that the drive is locked
in place and flush with the other drives.
2.
Log into the
mcmu
CLI as a primary admin such as mcinstall.
See Step 1a and Step 1b in “Remove a Storage Array HDD or SSD (CRU)” on page 19 for
those instructions.
3. Identify the full disk name of the replaced drive.
You can use a command such as
diskinfo
.
In this example,
HDD8
was replaced, and
diskinfo
shows that the full drive name for
HDD8
is
c0t5000CCA0536CA710d0
.
Also note that the storage array drives are identified by a
JBODARRAY
string.
% diskinfo
D:devchassis-path c:occupant-compdev
---------------------------------- ---------------------
/dev/chassis/SYS/HDD0/disk c0t5000CCA02D1EE2A8d0
/dev/chassis/SYS/HDD1/disk c0t5000CCA02D1E7AACd0
/dev/chassis/SYS/HDD2/disk c0t5000CCA02D1EDCECd0
/dev/chassis/SYS/HDD3/disk c0t5000CCA02D1ED360d0
/dev/chassis/SYS/HDD4/disk c0t5000CCA02D1EE6D8d0
/dev/chassis/SYS/HDD5/disk c0t5000CCA02D1EE6CCd0
/dev/chassis/SYS/HDD6 -
/dev/chassis/SYS/HDD7 -
/dev/chassis/SYS/MB/EUSB-DISK/disk c1t0d0
Servicing CRUs That Do Not Require System Power Off 23