Installing the High-Mount Customer Display on the
Adjustable Stand
The High-Mount Customer Display is only available for the revised MICROS
Workstation 6 Series Adjustable Stand (see Prerequisites). The display and bracket
are provided as a complete assembly and ready for installation.
Prerequisites:
•
Workstation 6 Series Adjustable Stand with High- and Low- Mount Customer
Display Options (Part Number: 7114626)
•
High-Mount Customer Display and Bracket Assembly (Part Number: 7114627)
•
No. 2 (1/4 in.) Phillips screwdriver
To install the High-Mount Customer Display on the Workstation 6 Series Adjustable
Stand:
1.
Place the Adjustable Stand upright on a flat surface, and then tilt the mounting
plate upwards to a vertical position.
2.
Remove the High-Mount slot cover.
3.
Slide the Customer Display power cord through the High-Mount slot and down
through the mounting plate.
4.
Insert the display and bracket assembly into the High-Mount slot. The bracket
should be firmly locked into place.
5.
To adjust or remove, press the release button on the bottom of the bracket to
unlock.
6.
Secure the display and bracket assembly to the Adjustable Stand using the
provided security screws (2) and a No. 2 (1/4”) Phillips screwdriver.
7.
Insert the Customer Display power cord into the Customer Display slot on the I/O
Panel.
Chapter 4
Installing the High-Mount Customer Display on the Adjustable Stand
4-18
