Legend
1 Riser
2 Controller motherboard
Important:
Ensure that any HBAs that must be removed from the failed
riser and placed onto the replacement rise are inserted into the same slots
on the replacement riser.
Insert a Riser
1 Lower the riser onto the Controller motherboard and press the riser edge
connector securely into the socket.
Important:
Ensure that any HBAs that must be removed from the failed
riser and placed onto the replacement rise are inserted into the same slots
on the replacement riser.
Figure 84: Insert riser
Legend
1 Riser
2 Controller motherboard
2 After the riser is seated properly inside the Controller, tighten the two
captive Phillips screws on both sides of the riser to secure the riser on the
Controller motherboard.
Controller Replacement Procedures
117
