Oracle Fabric Interconnect F2-12, Руководство по установке

Страница: 65 / 118

Connect the RJ-45 Ethernet Cables
For the Oracle F2 Quad Port 10GBASE-T module, the tab on the connector is to the right.
3. Insert the connector into the receptacle until it clicks, securing it in place.
4. Lay the cable into a slot on the cable management comb.
5.
Repeat Step 2 and Step 3 for each cable to be connected.
6. Consider your next task.
■
Connect the PrizmMT cables if necessary.
See “Connect the PrizmMT Cables” on page 66 .
Connecting Cables 65