Oracle EXADATA X5-8, Руководство по обслуживанию, Страница: 247 / 278

BIOS Setup Utility Screens
Advanced Setup Options Options Defaults Description
Internal Port 0 Disabled/ Enabled Enabled Enable or disable internal USB Port 0. By
default, internal port 0 is reserved for Oracle
System Assistant.
Internal Port 1 Disabled/ Enabled Enabled Enable or disable internal USB Port 1.
Serial Port Console
Redirection
Provides the capability to redirect console
output/input to the serial port. Graphic
output is not redirected. BIOS serial console
redirection lets you monitor BIOS POST
messages and navigate the BIOS Setup
utility menus and Option ROMs from a
terminal connected to the server using a
serial connection.
EMS Console Redirection Disabled/ Enabled Disabled Enable or disable console redirection for
Windows Emergency Management Service
(EMS) administration.
Console Redirection Disabled/ Enabled Enabled Enable or disable console redirection.
Terminal Type VT100/
VT100+/
VT-UTF8/
ANSI
VT100+ Select the emulation for the terminal:
VT100: ASCII character set. VT100+:
Extends VT100 to support color, function
keys, etc. VT-UTF8: Uses UTF8 encoding
to map Unicode characters onto one or more
bytes. ANSI: Extended ASCII character set.
Bits per Second 9600/ 10200
/ 57600/ 115200
9600 Select the serial port transmission speed. The
speed must be matched on the connecting
serial device. Long or noisy lines require
lower speeds.
Data Bits 07/08/11 8 Select the data bits.
Parity None/
Even/
Odd/
Mark/
Space
None A parity bit can be sent with the data bits to
detect some transmission errors.
None: No parity bits are sent.
Even: Parity bit is 0 if the number of 1s in
the data bits is even.
Odd: Parity bit is 0 if the number of 1s in the
data bits is odd.
Mark: Parity bit is always 1.
Space: Parity bit is always 0.
Mark and Space parity do not allow for error
detection. They can be used as an additional
data bit.
Stop Bits 01/02/11 1 Stop bits indicate the end of a serial data
packet. (A start bit indicates the beginning of
a serial data packet.) The standard setting is
BIOS Setup Utility 247