Oracle EXADATA X5-2 Скачать руководство пользователя страница 178

Страница: 178 / 262

Accessing the BIOS Setup Utility

Related Information

■

Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at:

http://www.

oracle.com/goto/ilom/docs

Accessing the BIOS Setup Utility

The BIOS Setup Utility provides five main menus that you can use to view product information,

and to configure, enable, and disable, or manage system components.

This section provides the following information:

■

“BIOS Setup Utility Menus” on page 178

■

“BIOS Key Mappings” on page 179

■

“Access BIOS Setup Utility Menus” on page 179

■

“Navigate BIOS Setup Utility Menus” on page 181

BIOS Setup Utility Menus

The following table provides descriptions for the top-level BIOS Setup Utility menus.

TABLE 17

BIOS Setup Utility Menus Summary

Menu

Description

Main

General product information, including memory, time/date, security settings, system serial

number, and CPU and DIMM information.

Advanced

Configuration information for the CPU, trusted computing, USB, and other information. Set

the IP address for the server SP.

Note -

When operating in UEFI Boot Mode, Runtime UEFI driver configuration settings let

you manage PCIe drivers for all configurable devices.

Boot

Set the boot mode to Legacy BIOS or UEFI BIOS, and configure the boot device priority.

Manage configuration settings for I/O devices, such as I/O virtualization settings, and enable

and disable Option ROMs.

Exit

Save changes and exit, discard changes and exit, discard changes, or restore the default BIOS

settings.

See

“BIOS Setup Utility Menu Options” on page 203

for examples of each of these screens.

178

Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018

Содержание EXADATA X5-2







































































































































































































































































Результаты поиска

Содержание EXADATA X5-2

Отзывы:

Бренды по названию

Популярные бренды

Oracle EXADATA X5-2, Руководство по обслуживанию

Результаты поиска

Содержание EXADATA X5-2

Отзывы:

Бренды по названию

Популярные бренды