•
ID
: Specifies the
es.xml
ID for the target ILOM
•
HOSTNAME
: Specifies the current host name of the target machine
•
ILOMNAME
: Specifies the current host name of the ILOM
3.3.3.10.2 LIST ILOMS
This command lists the ILOMs in the
es.xml
file.
Syntax
LIST ILOMS
[ WHERE {
ID = ilom_id |
HOSTNAME = hostname |
ILOMNAME = ilom_hostname } ]
Arguments
The following arguments are available in the
WHERE
clause:
•
ID
: Specifies the
es.xml
ID for the target ILOM
•
HOSTNAME
: Specifies the current host name of the target machine
•
ILOMNAME
: Specifies the current host name of the ILOM
Usage Notes
If you do not specify a WHERE clause, then this command lists all the ILOMs in the
es.xml
file.
3.3.3.11 MACHINE
You can alter or list the machines in the
es.xml
file.
•
(page 3-60)
•
(page 3-61)
3.3.3.11.1 ALTER MACHINE
This command alters attributes of a compute node or storage cell in an engineered
system.
Syntax
ALTER MACHINE { DNSSERVERS='dns_servers' | GATEWAYADAPTER=gateway_adapter |
HOSTNAMEADAPTER=hostname_adapter | NTPSERVERS= 'ntp_servers' |
TIMEZONE = timezone }
WHERE {
ID = machine_id |
HOSTNAME = hostname |
CLUSTERNUMBER = cluster_number COMPUTENUMBER = compute_number |
CLUSTERNUMBER = cluster_number STORAGENUMBER = storage_number |
CLUSTERNAME = cluster_name COMPUTENUMBER = compute_number |
CLUSTERNAME = cluster_name STORAGENUMBER = storage_number |
CLUSTERID = cluster_id COMPUTENUMBER = compute_number |
CLUSTERID = cluster_id STORAGENUMBER = storage_number }
Chapter 3
OEDA Command Line Interface
3-60
