Oracle Exadata Storage Server X7-2 EF Скачать руководство пользователя страница 193

Страница: 193 / 284

Power On the Server

■

“Return the Server to the Normal Rack Position” on page 191

■

“Power On the Server” on page 193

Power On the Server

As soon as you connect the power cords, Standby power is applied. In Standby power mode:

■

The System OK LED on the server front panel blinks slowly.

■

The SP OK LED indicator is steady on.

■

The AC Power Supply indicator lights are steady on.
Depending on the firmware configuration, the system might boot. If it does not boot,

perform the following procedure.

Power on the server to Main power mode by performing one of the following

actions:

■

Press the On/Standby button on the front bezel.

■

Log in to the Oracle ILOM web interface, click Host Management → Power

Control, and from the Select Action list, select Power On.

■

Log in to the Oracle ILOM command-line interface (CLI), and type the

following command at the Oracle ILOM prompt:

start /System

When the server is powered on to Main power mode and the power-on self-test (POST)

code checkpoint tests are complete, the green System OK LED status indicator on the front

panel of the server lights and remains lit.

Related Information

■

“Powering Down the Server” on page 53

■

“Reconnect Power and Data Cables” on page 192

Returning the Server to Operation

193

Содержание Exadata Storage Server X7-2 EF





























































































































































































































































































Результаты поиска

Содержание Exadata Storage Server X7-2 EF

Отзывы:

Бренды по названию

Популярные бренды

Oracle Exadata Storage Server X7-2 EF, Руководство по обслуживанию

Результаты поиска

Содержание Exadata Storage Server X7-2 EF

Отзывы:

Бренды по названию

Популярные бренды