background image

Upgrading the Switch Firmware

Refer to the 

Sun Ethernet Fabric Operating System Port Mirroring Administration Guide

 for

more information.

Uplink Port Trailing

The Uplink Port Trailing feature monitors the state of the uplink port and manages the downlink

ports according to the state of the uplink port. When the uplink goes down, the downlink ports

are shut down, providing the HA feature with the feedback it needs to switch over to alternate

link or path. For more details, refer to the 

Uplink Trailing Administration Guide

.

VRRPv3

VRRPv3 (VRRP version 3) extends capability to IPv6 in addition to IPv4. Version 3 supports

subsecond operation. VRRPv3 also supports accept-mode configuration. For more details, refer

to the 

VRRPv3 Administration Guide

.

Oracle ILOM 3.0 Updates

Support for Fault Management Architecture (FMA) for environmental monitoring and fault

management.

Upgrading the Switch Firmware

“Back Up the Current Configuration Before Upgrading” on page 12

“Download the Switch Firmware Package” on page 14

“Install the Switch Firmware” on page 15

Back Up the Current Configuration Before

Upgrading

Save the current configuration to a remote site before upgrading the software. Refer to the

Oracle Switch ES1-24 Configuration Guide

 for additional information.

12

Oracle Switch ES1-24 Product Notes • November 2016

Содержание ES1-24

































Отзывы: