Oracle Database Appliance X3-2, Руководство по обслуживанию

Страница: 155 / 188

Oracle Database Appliance (Original Version) BIOS Utility
Chapter 8 • Server Node Basic Input/Output System (BIOS) 155
BIOS POST Error Message Error Type Resolution
■ Check the SP event log in Oracle ILOM for more
details.
Password check failed Password check error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
details.
Note - This type of error indicates that the password
entered does not match the password specified in the
BIOS Setup Utility. This condition might occur for
both Supervisor and User password verification.
Keyboard/Interface Error Keyboard controller error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
details.
Note - This type of error indicates that the Keyboard
Controller failure. This error might indicate a problem
with system hardware.
S.M.A.R.T error on the drive S.M.A.R.T device error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
details.
Note - Self-Monitoring, Analysis, and Reporting
Technology (S.M.A.R.T.) failure messages might
indicate the need to replace the storage device.
How BIOS POST Memory Testing Works
The Oracle Database Appliance (original version) BIOS POST memory testing is performed as
follows:
1. The first megabyte of DRAM is tested by the BIOS before the BIOS code is copied from
ROM to DRAM.
2. After existing out of DRAM, the BIOS performs a simple memory test (where a write/read
of every location with the pattern 55aa55aa is performed).
Note -
The simple memory test is performed only if Quick Boot is not enabled from the
Boot Settings Configuration screen. Enabling Quick Boot causes the BIOS to skip the
memory test.
3. The BIOS polls the memory controllers for both correctable and non-correctable memory
errors and logs those errors into the SP.