manualshive.com logo in svg

Oracle Acme Packet 6300, Руководство по установке и обслуживанию оборудования, Страница: 10 / 131

Поделиться
Скачать
Oracle Acme Packet 6300 Скачать руководство пользователя страница 10

Date

Revision Number

Description

November 10, 2014

Revision 1.14

Entered a note in the Maintenance Introduction
pointing out that after you replace an SSD, you
must format it.
Corrected VCCI references.

January 15, 2015

Revision 1.15

Renamed the document to reflect the merge of
the Installation and Service manuals.
Removed Regulatory Specifications and
Certifications from the Specifications chapter.

Inserted reference to Acme Packet Platforms
Safety and Compliance Guide.

Inserted an updated Oracle copyright page.

April 20, 2015

Revision 1.15

Inserted language to confirm that Acme Packet
6300 hardware installation documentation
satisfies NEBS (Network Equipment-Building
System) requirements.
Entered a note at the end of the Startup chapter
pointing out that after you initially sign on to an
Acme Packet 6300 after installation, you must
format the solid state drive.

August 8, 2017

Revision 2.00

Adds support for Acme Packet 6350.

January 11, 2019

Revision 2.10

Adds the Oracle accessibility statement to
"About This Guide".

July 2020

Revision 2.20

Updates "NIU Removal and Installation" with
new images and notes.

Updates "DC Power Cords" with information on
a new cord.

About This Guide

x

Содержание Acme Packet 6300




































































































































Отзывы:

Нет отзывов