The next procedure is to remove the existing mirror and to install the ORA XL.
It may be
helpful to have another person assist with holding the mirrors whilst they are being
detached and installed.
14. Use 10mm socket or ring spanner to loosen the bolts, beginning with the bottom bolts.
15. Do not touch the screw in the centre. This screw helps support the mirror whilst you
are removing bolts. Once the bolts have been removed lift the mirror and carefully
remove and feed electrical cable through.
16. Seat the ORA XL mirror in place, ensuring that the rubber seal is flush and in position.
17. Screw in the top bolt first (initially not too tight) then the others. Then tighten all bolts.
5
More information https://www.caravansplus.com.au