IMPORTANT:
The POE cable only supplies power to the female connector.
DO NOT
plug
the integrated RJ45 end of the POE cable into the Ethernet modem or it will not be powered!
Figure 3-2 Incorrect Cable Connection
3.3 Test the System
The Wireless Ethernet Radios are preconfigured and paired to communicate with each other. When power is
applied, the channel LEDs will search for the clearest channel and lock in on one. This indicates that the two
units are communicating. The 6 link quality LEDs will indicate the relative strength of the signal.
Doc. No.: M00-20-6020 Rev.: 1
Page 13 of 22
