OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 152 / 181

ENTER (fleet table row # (1..20) or [RETURN] to exit) :
P>sh fleet
# ? Fleet/Acct Name
Prompt
Seq
Primary Secondary Onlin Offln A B
1 0
2 1 0000000000 ComdataPOS 18004564799 600 900 Qty $
3 0
4 0
5 0
: : : :
20
P>
15.9 Set ISO - ComdataPOS
As mentioned above under “12. Process … Market MC?” to maintain PCI compliance process rules, if you
want to process the Comdata MasterCard Fleet card you must “Activate” the ISO record specific to this card.
NOTE:
If you are already processing bankcards at this site, the record may already be set to
active, if not follow the steps below.
I - ISO # C - Card Number
L - Luhn check digit = - must be field separator
M - Month X - don't care digit or field separator
Y - Year # - don't care digit
0-9 - must be specified digit
> - don't check length to the end OR alternate network card
ISO #6: MSTRCRD-FLT --Inactive
ISO Range: 556-556
# of digits to display/print: 4
Card Type/PPT: 19/1
Authorization Amount/Max Fueling Limit: $150
ALL Products Valid
--Modify this ISO (Y/N/X)? y
The following setting is not used for the Comdata network...
Enter the Dollar Authorization/Fueling Limit (minimum $25): 150
Alter Product Restrictions for this card? (Y/N): N
---Set ACTIVE (Y/N)? y
P>
Doc. No.: M00-051.00 Rev.: 10
Page 152 of 181