QUICK GUIDE
MA-215SIP
MA-215SIP_Quick_Guide_ESP_ENG_V1.0
1.
CONNECTION
Amplifier SIP module. Unit includes two audio outputs, one for connection to 8 Ω speakers and another for
audio outputs at 0 dB level. The connection must be made as indicated in the following diagram.
Unit is powered through the PoE Splitter supplied with the equipment. Connect the input of the Splitter to
an Ethernet socket with PoE+ and the outputs to the Ethernet socket and power jack of the unit.
Unit also allows direct power supply through an external 12/24V power source (not included). If used, verify
that the output power does not exceed 30 W to avoid overheating.
2.
CONFIGURATION
The device is configured through a web server. It can be accessed by entering the IP address in the address
field of the web browser.
The default IP address of the device is 192.168.1.101. The IP address of the PC must be in the same IP
segment to allow the connection. Username and Password are blank by default.
If the IP address is incorrect or unknown, you can use the SIP Manager software to find out, confirm or
modify it. This software can also be used to set up the unit.
3.
SOFTWARE SIP MANAGER
SIP Manager software can be downloaded from the following link:
https://www.optimusaudio.com/arxius/software/SIPManager_sft.zip
4.
INSTRUCTION MANUAL
The complete installation and configuration manual can be downloaded from the following link:
https://www.optimusaudio.com/arxius/i_tecnica/MA‐215SIP_Manual_ESP_ENG.pdf
