Opvimus DA-4PM/0, Руководство по эксплуатации

Страница: 7 / 16

DA-4PM/0 version 1.0.E
7
Mainframe for
4 modular amplifiers
DA-4PM/0
4.3. Standby mode control connection
Closed contact: Standby mode ON.
4.4. Main input power supply
The equipment has a 100-240VAC power input which
allows the connection of the equipment to the mains by
means of the supplied cable. Figure 7.
If you are using MP-WDC series amplifiers, the equipment
has 4 secondary 24VDC power inputs independents, one
for each power amplifier module. This allows for these
amplifiers (MP-WDC Series) to be used in safety
installations through their connection to a 24VDC battery
system. Figure 8.
If you use this connection, you must place the
corresponding 24VDC fuse (see section 6. AMPLIFIER
MODULE FUSE PLACEMENT
).
STANDBY
CONTROL
Figure 6
Figure 7
Figure 8