1
HEALTH & SAFETY PRECAUTIONS
• Before using, the equipment please read the Health & Safety precautions, and the
operating manual.
• The operating manual should be available at all times for the operator to read.
• The equipment can only be used in accordance with the specifications in the user
guide/manual.
• Should be installed on a sturdy and level surface near a 230 V / 50 Hz AC socket.
the socket should be earthed in accordance with electrical regulations.
• Must be protected against moisture and dust.
• The equipment not be put near heating or ventilation units.
• Must not be used in or near a room with inflammable liquids or gases.
• The equipment not be used near aerosols of, oil, grease, petroleum
or inflammable substances.
• Do not use compressed air from an aerosol for clearing the shredder.
• Should be kept away and out of reach of children and animal’s.
• Must not be put or kept outside and should be operated in a room temperature
higher than +8°C.
• Should be operated accordance to the general Health & Safety rules.
• The power supply cable should be protected against any damage and not be used to pull
the equipment or to remove the plug from the power socket.
• Unplug the equipment from the power socket when removing the cover or cleaning
the inside.
• Danger! Equipment contains rotary elements. Keep away, long hair, loose jewellery,
ties and other loose pieces of clothing as they can become entangled in the cutting head.
• Be careful when feeding material into the slots.
• When the motor overheats, it will turn off without a signal, turn off the main switch
of the shredder immediately and wait for it to cool down!
• Do not put any heavy objects on the device!
• When any malfunction occurs, check that the equipment is being used correctly and then
contact the dealer or service point.
• Any repairs must be carryout by only authorised staff during the guarantee periods.
• After using the shredder, it must be turned off by the main switch or by unplugging
it from the power socket.
2
RECOMMENDATIONS
• The equipment was designed for shredding paper, credit cards and CDs.
• During longer none use of the shredder the mains switch should be turned “OFF”
and unplugged.
• Empty the shredded waste from the bin frequently.
• Before shredding, you must remove paper clips and staples from the documents.
• The shredder can only be operated with the original waste paper bin supplied.
• Pay attention during the installation of the cutting head on the bin. Incorrect installation
will cause damage to the sensor on the bin.
• To ensure long and faultless operation of the shredder do not shred more than 6 sheets
of 80g/m², one plastic card and one CD at a time. Do not shred computer printout paper,
PCV foil, coated paper or cardboard, it can cause damage of the cutting mechanism and
make the blades blunt.
8
Содержание VS 711 CD
Страница 6: ...6 ...
