background image

1

Before operating the equipment, please read the Health & Safety precautions, manu-

facturers recommendations and the operation manual. 
The manual should always be easily available at any time for the operator.

• The equipment: should be protected against dust and moisture.
•  

 

:must be installed on sturdy and level surface or on a stand.

•  

 

:must not be placed near a heating or ventilation unit.

•  

 

:should not be used in the vicinity of inflammable liquids or gas.

• 

 

:should be kept away from children’s reach.

• 

 

:must not be used for any other purposes than those indicated in 

  

 

 the instruction manual.

• 

 

:must not be kept outside, or operated in a room temperature lower

 

 

 than +8C.

•  

 

:cover must not removed with out removing the power plug from  

 

 

the socket there are high voltage components to avoid electric shock.

• 

 

:should be operated according to general safety rules

• 

 

:should be unplugged immediately, in case of any defect. 

• 

 

:repairs can be conducted only by authorized staff during the warranty period. 

• 

 

:during a long standstill, remove the power plug from a mains socket.

• Do not put heavy or sharp objects on the equipment.
• The power cable should be protected against any damage, must not be used 
   to pull, move or to remove the plug from the power socket. 
• If the cable is damaged it must be exchanged immediately.
• 

Danger!

 The equipment contains rotary elements. ensure long hair, loose jewelery, 

ties and other loose pieces of clothing are kept away tidy – they can get entangled in 

the rollers and crush and cut fingers.
• 

Danger burn hazard! 

The equipment contains heated elements – pay special attention. 

   Do not touch the rollers or put any inflammable materials on the equipment!

• After using the laminator turned off by main switch or by unplugging it 
   from the power socket. 

• 

Danger fire risk!

 Do not cover the equipment so the rollers can cool down. 

• 

Danger!

 Using inappropriate lubricants can cause a 

Fire hazard.

• It is necessary to check and supervise if the equipment is operated correctly, should

  there be any malfunction, before contacting the dealer or service team.
• Danger! Be careful when using end cutter and side cutter.

HEALTH & SAFETY PRECAUTIONS

12

Содержание RolLAM 380 Super




















Отзывы: