2
swallow it.
Batteries must not be dismantled, short-circuited or thrown into
fire. Never recharge non-rechargeable batteries. There is a risk
of explosion!
Repair works must only be carried out by a specialist/specialist
workshop.
If you have queries about handling the device, which are not
answered in this operating instruction, please check with the
distributor for further help.
4.
Operating Elements
5.
Power Supply
The shipped power adapter is the power supply for this charger. In
case you need to use other power adapter, please be aware that
power supply has the correct polarity plug. Also please be noted that
power supply need be able to supply minimum 3.0A current. Low
output power adapter could lead to working improperly.
Then all LCD segments will light up momentarily. “null” will be
shown until any batteries are inserted.
6.
Operation
Once a rechargeable battery is inserted, its present voltage( for
example, “1.12v”) will be displayed for 3 seconds, then 500mA
default charging current will be shown on display for another 3
seconds. If
MODE
or
CURRENT
button is not pressed during this 6
seconds, charging process will start. During the first 6 second time, If
any button is pressed, the unit will wait for another 10s before
finishing current slot setting. Press “SLOT” button will confirm the
setting right way without the needs of waiting the 10s auto time-out
time elapsed. All other battery can be handled the same. So each
battery can have its own setting independently.
While the previous battery slot setting mode is in effective (telling by
the flashing display of that battery slot LCD ), and the next battery is
inserted, then both battery slot display will be flashing, which means
that any setting change will be applied for all batteries in setting
mode at the same time.
Once start normal working mode, charging current can no longer be
changed unless its working mode is changed or batteries are taken
out from charger and insert into charger again.
During normal working mode, if no particular slot is selected by
pressing the SLOT button, MODE, CURRENT and DISPLAY button are
always referring to 4 slots simultaneously. If a different working or
display mode is desired for particular slot, press the SLOT button to
select the slot and then
press “Mode” or “Display” to select your wanted working or
display mode..
6.1 Mode Selection
Press and hold the “MODE” button for 2 seconds to start
working mode selection for all four battery slot.
Press the “MODE” button subsequently to toggle among the
“Charge”, ”Discharge”, ”Test” , “Quick Test” and
“Refresh” mode
When particular slot working mode need to be changed, press
SLOT button to select the desired slot and then press MODE
button to choose wanted working mode.
When working mode is changed, working current adjustment is
possible.
6.2 Current Selection
Within the first 6 seconds after inserting the battery or right after
power up, press the “CURRENT” button to select desired charge
current for slots loaded with battery at the same time. Current setting
can not be altered once the setting has been confirmed in the initial
stage. If different working current is needed afterwards, either
changing the working mode or rechargeable battery must be taken
out and inserted again. Discharge current is set to the selected
charge current selected.
6.3 Display Selection
“DISPLAY” button is for toggling display information for voltage,
current, capacity, work time etc.
