User’s guide CS 2208 CD
Health & Safety precautions:
•
Before using, the equipment please read the Health & Safety precautions, manufacturers’ recommendations and
the operating manual.
•
The operating manual should be available at all times for the operator to read.
•
The equipment can only be used in accordance with the specifications in the user guide/manual.
•
should be installed on a sturdy and level surface near a 220 to 240 V AC socket.
•
the socket should be earthed in accordance with electrical regulations.
•
must be protected against moisture and dust.
•
Do not put the equipment near heating or ventilation units.
•
The equipment must not be used in or near a room with inflammable liquids or gases.
•
Do not use the equipment near aerosols of, oil or grease made from petroleum or inflammable substances.
•
Do not use compressed air from a aerosol for clearing shredder.
•
The power supply cable should be protected against any damage and not be used to pull the equipment or to
remove the plug from the power socket.
•
Unplug the equipment from the power socket when removing the cover or cleaning the inside.
•
The equipment should be kept away and out of reach of children and animal’s.
•
Danger! Equipment contains rotary elements. Keep away, long hair, loose jewellery, ties and other loose pieces of
clothing as they can become entangled in the cutting head.
•
Be careful when feeding material into the slots.
•
When the motor overheats, it will turn off without a single, turn off the main switch of the shredder immediately and wait
for it to cool down!
•
Do not put any heavy objects on the device!
•
When any malfunction occurs, check that the equipment is being used correctly and then contact the dealer or
service point.
•
The equipment must not be put or kept outside and should be operated in a room temperature higher than +8°C.
•
The equipment should be operated accordance to the general Health & Safety rules.
•
Any repairs must be carryout by only authorised staff.
•
After using the shredder, it must be turned off by the main switch or by unplugging it from the power socket.
Recommendations:
•
The equipment was designed for shredding paper, credit cards and CD/DVDs.
•
During longer none operation, the mains switch should be turned “OFF’ and unplugged.
•
Empty the shredded waste from the bin frequently
•
The shredder can only be operated with the original paper bin supplied.
•
To ensure long and faultless use of the equipment do not shred more than 8 sheets of 80gram/m² paper at one time.
•
Do not shred computer continues printout paper, PVC foil, coated paper or cardboard as it can damage of cutting
knifes and mechanism and over load the electric motor.
•
The shredder is able to deal with light staples and paper clips
NOTE! Not complying with the recommendations above can result,
with the guarantee/warranty being made void.
