Opus AutoLAM A3, Руководство пользователя

Страница: 3 / 19

OPUS AutoLAM A3 • User guide
EN
3 UNIT DECRIPTION
1. Auto/Manual Mode Button.
2. Pouch Selection Button.
3. Auto mode Indicator.
4. Exit Tray.
5. Cold Lamination Indicator.
6. Pouch Indicator, 75 – 250 μm/micron.
7. Reverse Button.
8. On/Off Switch.
9. Pouch /Document Entry Slot.
3
• Always insert the laminating pouch, with the close end first.
• Putting the open end first can cause bubbling and the films to be stuck or rapped round
the rollers inside.
• Should a document get stuck inside the laminator use the reverse function (REV) switch
to eject the document.
• Tailor cut pouches can make the rollers sticky, dirty and rapped round them, use a carrier.
• Remove all metal elements (staples & paper clips, etc.) before laminating the documents.
• WARNING! The equipment contains heating elements, be aware high temperatures!
• Use a laminating pouch recommended for the size of the document.
• Insert the document into the centre of the pouch and the laminating slot.
• Do not laminate pouches without a document inside.
• Laminated documents should be cut after they have cool down.
• Self-adhesive pouch should only be laminated in the cold mode.
• Temperature sensitive documents should not be laminated in hot the lamination mode.
• Before laminating important document make a test on a similar document.
•
NOTE! Not compliance with the rules and recommendations above can void the Gua-
rantee/Warranty.
VS100AF
A
D I
H
E
G
F
B
C
A. On/Off Switch
B. Auto/Manual Mode Button
C. Pouch Selection Button
D. Auto mode Indicator
E. Cold Lamination Indicator
F. Pouch Indicator (75mic-250mic)
G. Reverse Button
H. Pouch /Document Entry Slot
I. Exit Tray
LAMINATOR CONTROLS
8
1
2
3
5
6
7
4
9