Opus Technologies LD 1.0, Инструкция по установке и эксплуатации

Страница: 13 / 36

*The OP-R mounting kit is not supplied with the
one-channel amplifiers (LD1.0, LD2.0 and LD3.0)
of the LD series.
13
4.5.4 Mounting the loop amplifier on a wall
Attach the mounting brackets as shown below (Figure 9)
using the screws provided in the kit.
Then, attach the amplifier to the selected wall.
Illustration of 2 amplifiers integrated
in a rack - Figure 8
Illustration of an amplifier integration
on a wall - Figure 9
Note: The OP-R mounting kit is not supplied with the
one-channel amplifiers (LD1.0, LD2.0 and LD3.0) of the
LD series.
4.5.3 Rack-mounting two loop amplifiers
Required accessory: OP-R* mounting kit
Attach the rack mounting brackets as shown below
(Figure 8) using the mounting screws provided in the kit.
Then attach the amplifiers to each other with the
mounting brackets.
Finally, integrate the amplifier into the rack.
LD Series | Installation and user manual
User manual
Required accessory: OP-R* mounting kit