Opus Technologies DCL20-PLUG, Инструкция по установке и эксплуатации

Страница: 17 / 24

17
2.4 Safety notes
The majority of problems with the hearing loop
loop happens when the installation has not been
properly reflected so let's take a while be- fore
starting the installation to better results and time
saving.
Ideally, the loop amplifier should be placed near
the area to be covered. This may involve placing
the amplifier on a panel, under a desk or under a
table.
The pickup microphone should be as close as
possible to the input of the amplifier.
To position the loop in the space to be
equipped, it is important to take into account the
final users of the system.
For example, if the place is planned for a con-
versation between a speaker and a client, a loop
around the desk may be a better solution rather
than a loop around the perimeter of the room. It
will limit radiation and increase confidentiali- ty.
DCL20-PLUG | Manuel d’installation et d’utilisation | Installation and user manual |