Optronis CP80-3-M/C-540, Руководство пользователя

Страница: 29 / 32

-29-
Xml entry Name
Address
Access
Mode
Type Valid
Values
Description
AcquisitionControl category
AcquisitionMode
@ 0x6018 RW Enumeration List:
”Continuous”
“SingleFrame”
“CoaxPress”
This feature controls the
acquisition mode of the device.
•
Continuous: Camera internal trig
•
SingleFrame: Camera ext. IO trig
•
CoaxPress: trig over CXP
AcquisitionStart
@0x601C RW Command CV = ‘1’
Mask:
LSB:31-MSB:24
This feature starts the Acquisition
of the device.
AcquisitionStop
@0x601C RW Command CV = ‘0’
Mask:
LSB:31-MSB:24
This feature stops the Acquisition
of the device at the end of the
current Frame.
AcquisitionFrameRate
@ 0x60C0 RW Float Min: 50
Max: dynamic,
depends on other
parameters
Max available at address
0x60C4
Frame rate in Hz.
ExposureTime
@0x60C8 RW Float Min: 2
Max: dynamic,
depends on other
parameters
Max available at address
0x60CC
Sets the Exposure time (in
microseconds)
when
ExposureMode is Timed. This
controls the duration where the
photosensitive cells are exposed
to light.
Granularity
@ 0x6018 RW Enumeration List:
“On”
“Off”
Granularity mode. If “On”, the
exposure is controlled by
“ExposureTime” entry. If “Off”,
exposure is controlled by Sync In
pulse
width (External or
CoaXPress trig modes only).
TransportLayerControl category
PayloadSize
RO IntSwissKnife Provides the number of bytes
transferred for each image or
chunk on the stream channel.
This includes any end-of-line,
end-of-frame statistics or other
stamp data. This is the total size
of data payload for a data block.
Support category
Standard
@ 0x0000 RO Integer CXP Bootstrap register Standard.
Revision
@ 0x0004 RO Integer CXP Bootstrap register Revision.