Edition of
FSU203.411
12.09.2012
Version 1.0
Page 8 of 10
FSU203
8.3 Load Default Values
The standard configuration can be loaded by use of main menu entry
„Load Default Values“
. Normally,
only minor or no adjustments should be necessary.
8.4 Adjust Phase
With high probability, a flickering and unstable picture can be corrected by an adjustment of the image
sampling phase. Move the star to main menu entry
„Adjust Phase“
, and activate the function by press-
ing button
Select
. Now, the phase can be corrected by use of buttons
Up/Left/-
and
Down/Right/+
. Val-
ues from 0 to 31 are possible. If the shown image does no more change by repeatedly pressing button
Up/Left/-
, you have reached position 0. If the image no more changes by repeatedly pressing button
Down/Right/+,
you have reached the upper end position 31.
8.5 Adjust Horizontally (Adjust Offset X)
The shown image can be horizontally shifted by use of main menu entry
„Adjust Offset X“
. Move the
star to this entry and activate the function by pressing button
Select
. Now, the horizontal image position
can be changed by use of the buttons
Up/Left/-
and
Down/Right/+
. If the shown image no more
changes, you have reached the left or right end position.
8.6 Adjust Vertically (Adjust Offset Y)
The shown image can be vertically shifted by use of main menu entry
„Adjust Offset Y“
. Move the star
to this entry and activate the function by pressing button
Select
. Now, the vertical image position can
be changed by use of the buttons
Up/Left/-
and
Down/Right/+
. If the shown image no more changes,
you have reached the upper or lower end position.
8.7 Adjust Width
The image width can be adjusted by use of main menu entry
„Adjust Width“
. Move the star to this entry
and activate the function by pressing button
Select
. Now, the image width can be adjusted by use of
the buttons
Up/Left/-
and
Down/Right/+
. If the shown image no more changes, the minimum or maxi-
mum possible width is reached.
8.8 Adjust Height
The image height can be adjusted by use of main menu entry
„Adjust Height“
. Move the star to this
entry and activate the function by pressing button
Select
. Now, the image height can be adjusted by
use of the buttons
Up/Left/-
and
Down/Right/+
. If the shown image no more changes, the minimum or
maximum possible height is reached.
8.9 Change Orientation
The shown image can be rotated and mirrored by use of main menu entry
„Change Orientation“
. Move
the star to this entry and activate the function by pressing button
Select
. Now, you can select between
four possible orientations by use of the buttons
Up/Left/-
and
Down/Right/+
.
