Optoma ZU600SA, Руководство пользователя

Страница: 59 / 65

English 59
ADDITIONAL INFORMATION
Troubleshooting
If you experience a problem with your projector, please refer to the following information. If a problem persists,
please contact your local reseller or service center.
Image problems
No image appears on-screen
‡ Ensure all the cables and power connections are correctly and securely connected as described in the
"Installation" section.
‡ Ensure the pins of connectors are not crooked or broken.
‡ Ensure that the "Shutter (AV Mute)" feature is not turned on.
Image is out of focus
‡ Press the Focus ▲ or Focus ▼ button on the remote control to adjust the focus until the image is
sharp and legible.
‡ Make sure the projection screen is between the required distance from the projector. (Please refer to
page 54).
The image is stretched when displaying 16:10 DVD title
‡ When you play anamorphic DVD or 16:10 DVD, the projector will show the best image in 16:10 format
on projector side.
‡ If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD.
‡ Please setup the display format as 16:10 (wide) aspect ratio type on your DVD player.
Image is too small or too large
‡ Press the Zoom ▲ or Zoom ▼ button on the remote control to increase or decrease the projected
image size.
‡ Move the projector closer to or further from the screen.
‡ Press "Menu" on the projector panel, go to "OUTPUT-->Aspect Ratio". Try the different settings.
Image has slanted sides:
‡ If possible, reposition the projector so that it is centered on the screen and below the bottom of the
screen.
‡ Use "OUTPUT-->Image Warping-->V Keystone" from the OSD to make an adjustment.
Image is reversed
‡ Select “SETUP-->Rear Projection-->On” from the OSD to reverse the image so you can project from
behind a translucent screen.