Optoma ZH510Te Скачать руководство пользователя страница 3

Страница: 3 / 49

English 3

SAFETY

The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the appli

ance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO

NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula

tions.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over

heating, it is recommended to install the projector in a location that does not block ventilation. As an example,

do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure

such as a book case or a cabinet that restricts air flow.

2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose

the projector to rain or moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers

that emits heat.

4. Clean only with dry cloth.

5. Only use attachments/accessories specified by the manufacturer.

6. Do not use the unit if it has been physically damaged or abused.

Physical damage/abuse would be (but not limited to):



Unit has been dropped.



Power supply cord or plug has been damaged.



Liquid has been spilled on to the projector.



Projector has been exposed to rain or moisture.



Something has fallen in the projector or something is loose inside.

Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages

or other hazards.

7. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts

that could result in fire or electric shock.

8. See projector enclosure for safety related markings.

9. The unit should only be repaired by appropriate service personnel.

Содержание ZH510Te


















































Результаты поиска

Содержание ZH510Te

Отзывы:

Похожие инструкции для ZH510Te

Бренды по названию

Популярные бренды

Optoma ZH510Te, Руководство пользователя

Результаты поиска

Содержание ZH510Te

Отзывы:

Похожие инструкции для ZH510Te

Бренды по названию

Популярные бренды