Optoma ZH510T-B, Руководство пользователя

Страница: 30 / 50

30 English
USER CONTROLS
Projection
Front: The image is projected straight on the screen. •
Front Ceiling: This is the default selection. When selected, the image will turn upside down. •
Rear: When selected, the image will appear reversed. •
Rear Ceiling: When selected, the image will appear reversed in upside down position. •
Geometric Correction
H Keystone •
Press the ◄ or ► button to adjust image distortion horizontal. If the image looks trapezoidal, this option can
help make the image rectangular.
V Keystone
•
Press the ◄ or ► button to adjust image distortion vertically. If the image looks trapezoidal, this option can
help make the image rectangular.
4 Corners
•
Adjust the image 4 corners pixel by pixel to make the image rectan- gular.
Grid Color
•
Set 4 corners correction function grid color.
Reset
•
Set H/V Keystone, 4 corners parameters to default values.
PIP-PBP Settings
Function: To enable/disable PIP/PBP function. •
Main Source: To set PIP/PBP main source. •
SUb Source: To set PIP/PBP sub source. •
Location: To set PIP sub source location. •
Size: To set PIP sub source size. •
Swap: To swap PIP/PBP main/sub source. •
Some source/signal combinations may not be compatible with PIP/PBP function. Please refer to the table below:
Matrix
HDMI-1 HDMI-2 Dongle HDBaseT VGA
HDMI-1 - V V - V
HDMI-2 V - - V V
Dongle V - - V V
HDBaseT - V V - V
VGA V V V V -
1. Flashing lines may occur if the bandwidth of both inputs are too high, please try to reduce the resolution.
2. Frame tearing may occur due to a difference in frame rate between the Main and the Sub picture, please try to
match the frame rate for each input.