Optoma X343e, Руководство пользователя

Страница: 63 / 99

English
63
USING THE PROJECTOR
Auto Power Off (min.)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
Sleep Timer (min.)
Configure the sleep timer.
‡
Sleep Timer (min)e:
Sets the countdown timer interval. The countdown timer will start, with or without
a signal being sent to the projector. The projector will automatically power off when the countdown has
finished (in minutes).
Notee: The Sleep Timer is reset every time when the projector is powered off.
‡
Always One:
Check to set the sleep timer always on.
Quick Resume
Set the quick resume setting.
‡
One:
If the projector is accidentally turned off, this feature allows the projector to be instantly powered
on again, if selected within a period of 100 seconds.
‡
Offe:
The fan will start cooling the system after 10 seconds when user turns off the projector.
Power Mode (Standby)
Set the power mode setting.
‡
Activee:
Choose “Active” to return to normal standby.
‡
Ecoe:
Choose “Eco.” to save power dissipation further < 0.5W.
Notee: The fans will still run in active standby if “Signal Power On” is enabled.
USB Power
Set the USB power settings.
‡
One:
The projector is always powered on by a USB power source.
‡
Offe:
The USB Power function is off.
‡
Autoe:
The projector is automatically powered on by a USB power source.
Setup security menu
Security
Enable this function to prompt for a password before using the projector.
‡
One:
Choose “On” to use security verification when the turning on the projector.
‡
Offe:
Choose “Off” to be able to switch on the projector without password verification.
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.