manualshive.com logo in svg

Optoma W415-M, Руководство пользователя, Страница: 29 / 107

Поделиться
Скачать
Optoma W415-M Скачать руководство пользователя страница 29

English

29

User Controls

 Contrast

The contrast controls the degree of difference between the 

lightest and darkest parts of the picture.

 Press 

◄

 to decrease the contrast.

 Press 

►

 to increase the contrast.

 Sharpness

Adjusts the sharpness of the image.

 Press 

◄

 to decrease the sharpness.

 Press 

►

 to increase the sharpness.

 Color

Adjusts a video image from black and white to full color 

saturation.

 Press 

◄

 to decrease the amount of color in the image.

 Press 

►

 to increase the amount of color in the image.

 Tint

Adjusts the color balance of red and green.

 Press 

◄

 to increase the amount of green in the image.

 Press 

►

 to increase the amount of red in the image.

 Advanced

Enter the Advanced menu. Select advanced display 

options such as Noise Reduction, BrilliantColor™, Gamma, 

Color Temp., Color Space, Color Matching, Signal, and 

Exit. See page 30 for more information.

Содержание W415-M












































































































Отзывы:

Нет отзывов