English
4
Check if the projection lamp has been securely installed. Please
refer to the
Replacing the lamp
section.
4
Make sure you have removed the lens cap and the projector is
switched on.
Partial, scrolling or incorrectly displayed image
4
Press “Re-Sync” on the remote.
4
If you are using a PC:
For Windows 95, 98, 2000, XP:
1. Open the
My Computer
icon, the
Control Panel
folder, and
then double click on the
Display
icon.
2. Select the
Settings
tab.
3. Verify that your display resolution setting is lower than or
equal to UXGA (1600 x 1200).
4. Click on the
Advanced Properties
button.
If the projector is still not projecting the whole image, you
will also need to change the monitor display you are using.
Refer to the following steps.
5. Verify the resolution setting is lower than or equal to UXGA
(1600 x 1200).
6. Select the
Change
button under the
Monitor
tab.
7. Click on
Show all devices
. Next, select
Standard monitor
types
under the SP box; choose the resolution mode you
need under the “Models” box.
8. Verify that the resolution setting of the monitor display is
lower than or equal to UXGA (1600 x 1200). (*)
Appendices
