HD3000
6-4
No
Step
Procedure
Photo
5
Change
Cable to
HDMI
- “Please Change the cable
to Digital” Message is
shown on the screen.
- Connect Port P3 of fixture
and HDMI port of HD3000
by DVI cable which link with
HDMI-DVI adapter.
- Click “OK”
6
HDMI
finished
- When the EDID programn
is completed, the
message “OK” will appear
on the screen.
7
Check
the whole
process
. In the “Read Item”
Selections, choose the
Port that you use.
Ex: If you use the Analog
(Digital) Port, choose
“Analog(Digital)” in the
“Read Item”.
(Note: After clicking “Read” ,
if the code in the Serial Blank
is scrambled, please make a
check in “Trans”.)
2. Click on “Read” to read
EDID information.
3. The “EDID Informations”
will show the result.
4. Click “Reset” to do the
next unit or “Exit” to close
the EDID program.
4
3
2.
