Safety Instructions & Warranty
v
• Before you connect the Digital Signage Processor to a power source,
ensure that the voltage rating of the AC adapter matches that of the
available power source.
• 115 V/60 Hz in most of North and South America and some Far Eastern
countries such as South Korea and Taiwan.
• 100 V/50 Hz in eastern Japan and 100 V/60Hz in western Japan.
• 230 V/50 Hz in most of Europe, the Middle East, and the Far East.
• If you use an extension cable with your AC adapter, ensure that the total
ampere rating of the products plugged in to the extension cable does not
exceed the ampere rating of the extension cable.
• Do not cover the AC adapter with papers or other items that may
reduce cooling; also, do not use the AC adapter while it is inside a
carrying case.
• To remove power from the Digital Signage Processor, turn it off and
disconnect the AC adapter from the electrical outlet.
• The plug is the disconnecting device.
Warranty
We warrant that each of our products will be free from material
and workmanship defects for two years from the date of purchase. If
the customer discovers a defect, contact your dealer. Defective
products will be repaired or replaced at no charge to the customer,
provided it is returned during the warranty period of two years.
This warranty does not apply to any products which have been
repaired or altered by persons other than authorized repair
personnel, or which have been subject to misuse, abuse, accident
or improper installation. We assume no liability under the terms of
this warranty as a consequence of such events.
Technical Support
For technical support and service, please contact your dealer or
visit the website indicated at the back of the warranty card.
