9
English
User Controls
Control Panel
Control Panel & Remote Control
There are two ways for you to control the functions:
Control Panel and Remote Control.
Using the Control Panel
Power
Standby
Power LED
Refer to the “Power On/Off the Projector” section
on pages 15-16.
Indicate the projector’s status.
Enter
Confirm your item selection.
Menu
Press “Menu” to launch the on-screen display (OSD)
menu. To exit OSD, Press “Menu” again.
Re-Sync
Automatically synchronize the projector to the input
source.
Source
Press “Source” to select an input signal.
Four Directional
Select Keys
Use
to select items or make adjustments
to your selection.
Keystone
Use
to adjust image distortion caused by
tilting the projector. (
±16 degrees)
Lamp LED
Indicate the projector’s lamp status.
Temp LED
Indicate the projector’s temperature status.
