8
B.
If left inactive in pairing mode, your BE Sport4 will automatically
power off after 3 minutes.
C.
Your BE Sport4 can store pairing information for up to eight
devices.
To pair additional devices to your BE Sport4 ensure that your BE
Sport4 is not concurrently connected to any device, then repeat
the steps 1,2,3 outlined above.
In case where your BE Sport4 have already stored pairing
information for eight devices and a ninth device is paired, the
stored information for the very first device will be deleted.
Power On/Power Off
To power on your BE Sport4, press Power/Function button for about 2
seconds until the LED indicator flashes blue and you hear the “Power
on”.
NOTE:
Once you have successfully paired the BE Sport4 to a
Bluetooth
-enabled
device, the BE Sport4 will automatically connect with that device once it
is powered on again. For more information check “
Bluetooth
Pairing”
section.
If you have stored pairing information for multiple devices and more than
one of those devices is
Bluetooth
enabled, the BE Sport4 will
automatically connect with the most recently paired device.
For more information read section “Multipoint Connections”.
To turn the BE Sport4 to OFF, push Power/Function button for about 4
